Warning: Undefined array key -1 in /var/www/html/dokuwiki/inc/html.php on line 1458

Differences

This shows you the differences between two versions of the page.

--- bdev:rearm_marlin [2021/10/06 21:45]
richard
+++ bdev:rearm_marlin [2021/10/27 23:08] (current)
richard
@@ Line 1: / Line 1: @@
 ====== Re-ARM Marlin ======
+\\
+My latest back up
+{{ :bdev:marlinfirmware.zip |}}
+\\
 \\
 https://github.com/MarlinFirmware/Marlin\\
@@ Line 7: / Line 12: @@
 \\
+\\
+Set steps per mm\\
+https://marlinfw.org/docs/gcode/M092.html
+\\
+\\
+Cold extrusion\\
+https://marlinfw.org/docs/gcode/M302.html
+<code>
+M302         ; report current cold extrusion state
+M302 P0      ; enable cold extrusion checking
+M302 P1      ; disable cold extrusion checking
+M302 S0      ; always allow extrusion (disable checking)
+M302 S170    ; only allow extrusion above 170
+M302 S170 P1 ; set min extrude temp to 170 but leave disabled
+</code>
 \\
@@ Line 107: / Line 127: @@
 {% endif %}
 </code>
+\\
+Notes on baby stepping https://community.octoprint.org/t/how-to-still-control-z-adjustment-during-print/19413/11
+\\
+https://3dprintbeginner.com/octoprint-baby-stepping/
 \\
 Zprobe set up \\
@@ Line 117: / Line 139: @@
 #define Z_SERVO_ANGLES { 100, 0 } // Z Servo Deploy and Stow angles
 </code>
+\\
+Offsets for Z probe\\
+https://marlinfw.org/docs/gcode/M851.html
 \\
 Zprobe bilinear\\

labautobox