Differences

This shows you the differences between two versions of the page.

--- bdev:wash_dry_pipette_ejection [2020/09/27 01:38]
richard
+++ bdev:wash_dry_pipette_ejection [2021/08/26 04:06] (current)
richard
@@ Line 9: / Line 9: @@
 The wash/dry station consists of 3 3D printed parts
+Assembled 3D module {{ :bdev:image-20191020-160542.png?200 }}
+----
+| [[http://52.200.33.55/devstlwork/catch.php?jscad=washbowl_8tip_base.jscad&project=labbotbuild|washbowl_8tip_base.jscad]] | Project: labbotbuild |
+{{:bdev:washbowl_8tip_base.jscad.png?400|}}
+| [[http://52.200.33.55/devstlwork/catch.php?jscad=washbowl8tip_lid_tipremoval.jscad&project=labbotbuild|washbowl8tip_lid_tipremoval.jscad]] | Project: labbotbuild |
+{{:bdev:washbowl8tip_lid_tipremoval.jscad.png?400|}}
+----
+washbowl_8tip_base() {{ :bdev:washbowl_8tip_base.stl}}
+{{:bdev:image-20191020-161015.png?200 }} {{ :bdev:image-20200422-180406.png?200 }}
+This needs to be printed at a higher infill (like 70%) to prevent leakage or you can spray it with flex seal or similar silicon waterproofing coating.
+----
+washbowl_8tip() {{ :bdev:washbowl_8tip.stl}}
+{{:bdev:image-20191020-162544.png?200}}
+This connects to the extrusion
+----
+washbowl_8tip_drypad() {{ :bdev:washbowl_8tip_drypad.stl}}
+{{:bdev:image-20191020-163102.png?200 }} {{ :bdev:image-20191020-163657.png?200}}
+----
+The pipette ejection plate currently comes in two sizes (p200 and p20). So they are interchangeable.
+multichannel_drypad()
+multichannel_tipremoval()
+{{ :bdev:multichannel_tipremoval.stl |}}
+{{:bdev:multichannel_drypad.stl }} {{ :bdev:multichannel_drypad_384.stl}}
+{{:bdev:image-20191206-142800.png?200 }} {{ :bdev:image-20191020-175500.png?200}}
+{{:bdev:image-20191020-180808.png?200 }}{{:bdev:image-20191020-180828.png?200}} {{ :bdev:image-20191020-180849.png?200}}

labautobox

User Tools

Site Tools

Differences

Page Tools