labautobox

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Putting together a pipette flushing macro ======

Flushing the pipette tips is a good way to assess that they air bubbles are out of the lines everything is working well. Here are steps on how to build a flushing macro using the "[[software_overview|Build Macro]]" page (introduced here), which will be saved as a custom macro. Generally, the steps involved are as followed: 
 
  - Move 4-way valves to bypass
  - Move pipettes to waste station
  - Move 4-way valves to input
  - Load multichannel syringes with 500 microliters
  - Turn on waste pump
  - Move 4-way valves to output
  - Dispense 500 microliters
  - Dry pipette tips
  - Turn off waste pump

----
Here is a video that explains how to compile the macro.
//
//
{{youtube>w-urOVQg5V4}}

----
Here is the macro code.
//
//
<code>
//valve-1_1_1_1_1_1_1_1-valvebypass
valve-1_1_1_1_1_1_1_1-bypass
//motion waste station zh 0 row 1 F3000
G1Z0F3000
G1X235.5Y24F3000
G1Z12F3000
//valve-1_1_1_1_1_1_1_1-valveinput
valve-1_1_1_1_1_1_1_1-input
//syringe 500 speed 40 acc 20
sg1e500s40a20_17
G1Z12F3000_2
//waste 2 on
wasteon
//valve-1_1_1_1_1_1_1_1-valveoutput
valve-1_1_1_1_1_1_1_1-output
//syringe 0 speed 40 acc 20
sg1e0s40a20_17
//valve-1_1_1_1_1_1_1_1-valvebypass
valve-1_1_1_1_1_1_1_1-bypass
//just dry function
touchdry Z9.5F3000ZT0T0.1
//waste 2 off
wasteoff
</code>


----
Here is video showing the process
//
//
{{youtube>826EpRLjeEA?&rel=0|Pipette flushing example}}

labautobox

User Tools

Site Tools

Page Tools