====== 2D imagers ======

This version describes how to assemble the 2D matrix imager inside an electronic box enclosure which is entirely 3D printed. The Raspi's both have to positioned outside the imager to reduce glare. There is plastic positioned on top of the imager. 

{{ :bdev:cyto_2dimagerpic.png?400 |}}



===== Bottom box =====

----
The left side has holes for screwing in the hub. The hub is a D-Link 5 port fast ethernet switch, DES-105. 

{{ :bdev:bottom_box.stl |}}



----

Screw in the stand, the stand can be positioned along the rail using a tslot screw. 



----

Then screw the arducam_rotate_2mount_adjuster and the nuts for sliding the adjuster which are called arducam_rotate_2mount_adjuster_nut



----


The cameras need to be adjusted to get the pictures aligned, You have to pivot, move in X/Y direction.