====== Head camera ======

The camera system enables the possibility of doing scanning and also it can be used as a stroboscope so this page will describe the setup. Here are examples of the stroboscope and the scanner

https://www.youtube.com/watch?v=M2ut38dVjQI&feature=youtu.be

 

The software for controlling a raspberry pi camera keeps evolving. Here is a cool one I just found

http://blog.cudmore.io/triggercamera/


|{{ :bdev:headcamera_assembly.png?200 |}}|{{ :bdev:headcamera_assembly_details.png?200 |}}|
----

This system work with different focal distance lenses. Normally preferred is the 25mm focal distance lens. 

{{ :bdev:headcamera_lensemod.png?400 |}}

----

|{{ :bdev:miuzei_camera_breadboard_a.png?200 |}}|miuzei_camera_breadboard_a  {{ :bdev:miuzei_camera_breadboard_a.stl |}}|
|{{ :bdev:camera_breadboard_b.png?200 |}}|miuzei_camera_breadboard_b {{ :bdev:miuzei_camera_breadboard_b.stl |}}|
|{{ :bdev:raspberrypizero.png?200 |}}|RaspberryPi zero|
|{{ :bdev:raspizerobase_extrusion.png?200 |}} | raspizerobase_extrusion {{ :bdev:raspizerobase_extrusion.stl |}}|
|{{ :bdev:miuzei_camera_breadboard_screwstub.png?200 |}} |miuzei_camera_breadboard_screwstub {{ :bdev:miuzei_camera_breadboard_screwstub.stl |}} |
|{{ :bdev:mnt_md_justclip.png?200 |}}|mnt_md_justclip {{ :bdev:mnt_md_justclip.stl |}}|
|{{ :bdev:connectionarms2.png?200 |}}|connectionarms2 {{ :bdev:connectionarms2.stl |}}|
|{{ :bdev:miuzei_cover.png?200 |}}|miuzei_cover {{ :bdev:miuzei_cover.stl |}}|
|{{ :bdev:miuzei_raspicam_base.png?200 |}}|miuzei_raspicam_base {{ :bdev:miuzei_raspicam_base.stl |}}|
|{{ :bdev:miuzeiraspberrypi3.png?200 |}}|Miuzei Raspberry Pi 3 Camera Module, 5 Megapixels Wide-Angel Fish-Eye Camera, OV5647 Sensor with Flex Cable for Raspberry Pi 4/ 3B+/ 3B/ 2B/ Pi Zero https://www.amazon.com/gp/product/B07BTP8VXL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1|
|{{ :bdev:miuzei_lenscap_16_.png?200 |}}|miuzei_lenscap(16) This is for 25mm focal distance lens but height will vary depending on the lens. This needs to be tapped with M12 tap for screwing an M12 lens {{ :bdev:miuzei_lenscap.stl |}}|



----


This is designed to be a configureable camera. So to adapted to also function as a stroboscope camera. So to do this, here are the parts:

|{{ :bdev:stroboscope_miuzei_back.png?200 |}}|stroboscope_miuzei_back {{ :bdev:stroboscope_miuzei_back.stl |}}|
|{{ :bdev:stroboscope_miuzei_mirror.png?200 |}}|stroboscope_miuzei_mirror {{ :bdev:stroboscope_miuzei_mirror.stl |}}|