The camera system enables the possibility of doing scanning and also it can be used as a stroboscope so this page will describe the setup. Here are examples of the stroboscope and the scanner

https://www.youtube.com/watch?v=M2ut38dVjQI&feature=youtu.be

The software for controlling a raspberry pi camera keeps evolving. Here is a cool one I just found

http://blog.cudmore.io/triggercamera/

—-

This system work with different focal distance lenses. Normally preferred is the 25mm focal distance lens.

	miuzei_camera_breadboard_a miuzei_camera_breadboard_a.stl
	miuzei_camera_breadboard_b miuzei_camera_breadboard_b.stl
	RaspberryPi zero
	raspizerobase_extrusion raspizerobase_extrusion.stl
	miuzei_camera_breadboard_screwstub miuzei_camera_breadboard_screwstub.stl
	mnt_md_justclip mnt_md_justclip.stl
	connectionarms2 connectionarms2.stl
	miuzei_cover miuzei_cover.stl
	miuzei_raspicam_base miuzei_raspicam_base.stl
	Miuzei Raspberry Pi 3 Camera Module, 5 Megapixels Wide-Angel Fish-Eye Camera, OV5647 Sensor with Flex Cable for Raspberry Pi 4/ 3B+/ 3B/ 2B/ Pi Zero https://www.amazon.com/gp/product/B07BTP8VXL/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
	miuzei_lenscap(16) This is for 25mm focal distance lens but height will vary depending on the lens. This needs to be tapped with M12 tap for screwing an M12 lens miuzei_lenscap.stl

This is designed to be a configureable camera. So to adapted to also function as a stroboscope camera. So to do this, here are the parts:

	stroboscope_miuzei_back stroboscope_miuzei_back.stl
	stroboscope_miuzei_mirror stroboscope_miuzei_mirror.stl