bdev:minithermocycler
This is an old revision of the document!
Steps for building a mini thermocycler
 |  |
Custom Parts:
| 1. Milling thermoblock. It costs $100 to make this. thermoblock_holder_1inch_half.stl |  |
| 2. Lid with 2 3mm set screws drillblock_1inch_lid_half.stl |  |
| 3. Block holder thermoblock_holder_1inch_half_1_.stl |  |
Off the shelf:
| 1. Power supply |  |
| 2. Peltier cooling system |  |
| 3. Mosfets |  |
| 4. Diodes |   |
| 5. Heater/Thermistors |  |
| 6. Arduino Nano |  |
bdev/minithermocycler.1603143486.txt.gz · Last modified: 2021/08/16 22:21 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
