bdev:thermomodel100_2
This is an old revision of the document!
Thermoblock model 100 timestamp
When heating the liquid will shoot out of the orifice, this data models the rate at which it does. To do this the aspiration conditions were like so: 6ul air 6ul dye 6ul air model100_2.zip
Pre 30 second 100C incubation
First 30 second 100C incubation
Second 30 second 100C incubation
Third 30 second 100C incubation
Fourth 30 second 100C incubation
//6air6dye8air_photo //50air6dye7air_photo //50air6dye7air //50air6dye3air //airdyeair //airdyeair //airdyeair //airdyeair //waterdyeair //airdyeair //shakevalves //valve-1_1_1_1_1_1_1_1-valveinput valve-1_1_1_1_1_1_1_1-input G1Z0F1000_0.5 //valve-1_1_1_1_1_1_1_1-valveoutput valve-1_1_1_1_1_1_1_1-output G1Z0F1000_0.5 //valve-1_1_1_1_1_1_1_1-valveinput valve-1_1_1_1_1_1_1_1-input G1Z0F1000_0.5 //valve-1_1_1_1_1_1_1_1-valveoutput valve-1_1_1_1_1_1_1_1-output G1Z0F1000_0.5 //valve-1_1_1_1_1_1_1_1-valveinput valve-1_1_1_1_1_1_1_1-input G1Z0F1000_0.5 //valve-1_1_1_1_1_1_1_1-valveoutput valve-1_1_1_1_1_1_1_1-output G1Z0F1000_0.5 //valve-1_1_1_1_1_1_1_1-valveinput valve-1_1_1_1_1_1_1_1-input //syringe 300 speed 40 acc 20 sg1e300s40a20_20 //valve-1_1_1_1_1_1_1_1-valveoutput valve-1_1_1_1_1_1_1_1-output sg1e306s60a20_6 //valve-1_1_1_1_1_1_1_1-valvebypass valve-1_1_1_1_1_1_1_1-bypass //dyeaspmodel //dyeaspmodel //motion 96well zh 20 row 2 F3000 G1Z0F3000 G1X228.16666666667Y183.5F5000_8 G1Z40F3000 //motion 96well zh 0 row 2 F500 G1X228.16666666667Y183.5F500 G1Z60F500_5 //valve-1_1_1_1_1_1_1_1-valveoutput valve-1_1_1_1_1_1_1_1-output //syringe 326 speed 6 acc 3 sg1e312s6a3_8 G1Z60F500_2 //valve-1_1_1_1_1_1_1_1-valvebypass valve-1_1_1_1_1_1_1_1-bypass //motion 96well zh 20 row 2 F3000 G1X228.16666666667Y183.5F3000 G1Z40F3000 //valve-1_1_1_1_1_1_1_1-valveoutput valve-1_1_1_1_1_1_1_1-output sg1e320s6a3_8 //valve-1_1_1_1_1_1_1_1-valvebypass valve-1_1_1_1_1_1_1_1-bypass //washmodel //motion wash station zh 0 row 1 F3000 G1Z0F3000 G1X235.5Y36F3000 G1Z40F3000 //waste 2 on wasteon //wash 1 on washon G1Z40F3000_10 //wash 1 off washoff //waste 2 off wasteoff //just dry function G1Z0F3000_2 touchdry Z20F3000ZT0T1 G1Z0F3000_2 //brightfieldcam G1X108Y75Z0.0F3000 G1Z55F3000 //camsnap 192.168.1.87_11032020132714_model100 347 50 snap 192.168.1.87_347_50_11032020132714_model100
bdev/thermomodel100_2.1604445530.txt.gz · Last modified: 2021/08/16 22:21 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
