bdev:z_drive_systems_bed
This is an old revision of the document!
Z drive bed assembly
This system works with this scaffold assembly LabBot build
It is based on this function, zbed_assy_wider_threadedrod_noextrusion_higher, found in bom_zbed_moveup.scad
| bearing_mount_smz (need 2) |  | bearing_mount_smz.stl |
| motormount_smz (need 2) |  | motormount_smz.stl motormount_smz_dual_mirrored.stl |
| clamp_bottom_simple_m8_smoothrodholder_for_z (need 4) |  | clamp_bottom_simple_m8_smoothrodholder_for_z.stl |
| 4 smooth rods m8 437 mm long | 2 2020 extrusions 437mm long | |
| 2 nema 17 with rod 377mm long |   | |
| T8 nut anti-backlash (need 2) |  | |
| bed_attach_assy_tslot (4 of them) |  | front_threadedrod_bed_adjustwheel_tslot.stl |
bdev/z_drive_systems_bed.1626815268.txt.gz · Last modified: 2021/08/16 22:21 (external edit)
Except where otherwise noted, content on this wiki is licensed under the following license: GNU Free Documentation License 1.3
