Nano-Plotter™ Piezoelectric Dispensing Nozzles

For more details about these products, please go to shop.

Validated materials list

  • High precision mounting-pad
  • Chamber Volume: approx. 0.7 ┬ÁL
  • Dip depth: approx. 18 mm
  • Fits both to 96 well and 384 well micro plates
Models:
  • A070-401 - NanoTip -J (300-600 Picoliter, <= 5mPas)
  • A070-560 - NanoTip -J-H heated (300-600 Picoliter, <= 100mPas)
  • A070-402 - PicoTip -J (60-100 Picoliter, <= 5mPas)
  • A070-561 - PicoTip -J-H heated (60-100 Picoliter, <= 80mPas)
  • A070-503 - NanoTipA-J (250-450 Picoliter, <= 5mPas)
  • A070-505 - NanoTip-HV (200-500 Picoliter, <= 25mPas)
  • A070-562 - NanoTip-HV-JH heated (200-500 Picoliter, <= 500mPas)
  • A070-506 - Nano-Tip AR-J, 250 pL (Slim design for arraying into 96-wells)

View details »


Stainless Steel Capillary

piezoelectric nozzles stainless steel inlet

A010-001 SPIP with stainless steel inlet (500-1000 Picoliter, <= 5mPas)
A010-200 PicPIP with stainless steel inlet (100-300 Picoliter, <= 5mPas)

  • SPIP with stainless steel inlet (perpendicular to dispense axis) and holder
  • Stainless steel connection: OD 1.6mm, ID 0.8mm
  • For flexible tubing with 1.1mm inner diameter
  • Contains mounting pad with two 2.2mm holes


PEEK Capillary Tubing

peek tubing piezoelectric nozzle

A010-003 SPIP with 1/16in PEEK capillary and holder (500-1000 Picoliter, <= 5mPas)
A010-005 PicPIP with 1/16in PEEK capillary and holder (100-300 Picoliter, <= 5mPas)

  • For the dosage of aggressive liquids
  • Liquid not in contact with metal
  • Contains mounting pad with two 2.2mm holes


dispensers work exactly releasing drop when the piezo ceramic actuator is triggered





Angled Steel Capillary

angled capillary piezoelectric dispense nozzle

A010-002 SPIP (500-1000 Picoliter, <= 5mPas)
A010-201 PicPIP with stainless steel inlet (100-300 Picoliter, <= 5mPas)

  • SPIP with angled steel capillary (perpendicular to dispense axis) and holder
  • Stainless steel for Teflon tubing: inner Diameter (ID) 0.7-0.8mm
  • Contains mounting pad with two 2.2mm holes

HPLC Bushing Connection

HPLC bushing piezoelectric nozzle

A010-004 SPIP with 1/16in HPLC bushing (PEEK) (500-1000 Picoliter, <= 5mPas)
A010-203 PicPIP with 1/16in HPLC (100-300 Picoliter, <= 5mPas)

  • Connection via standard 1/16in HPLC bushing for fraction collection

   © HTS Resources